Ultrasonix SONIX Series, Руководство по обслуживанию

Страница: 37 / 136

3.2.10 Changing Fuses
It is easier to change fuses if the rear cover is removed first.
Tools required: #1 flat head screwdriver.
Table 3-10: Changing a Fuse
Step 1: Make sure the system is completely turned off. Unplug the
SONIX from the wall socket and remove the rear cover.
Step 2: Use the screw driver to open the fuse box lid.
Step 3: Use the screw driver to take out the fuse box. Position the
screw driver at the top, just like in step 2.
Step 4: Replace the 2 fuses on both sides of the fuse box. It should
not be necessary to use a screwdriver to remove the fuses.
Note: Make sure the fuse type is: 3AG Slo-Blo, 7A/250V
3.2.11 Final Inspection
1. Inspect the system for scratches or damage. Note any damage to the system and
report it to Ultrasonix.
2. Plug main AC to primary power connector.
3. Turn on the LCD display.
4. Turn on the system.
Note: The console POWER button is located to the left of the touch screen.
5. Inform the facilities representative when the system is installed and ready for any
safety testing they would normally conduct.
6. Once it is running, the LCD display will show a black background image field with
settings information or the patient ID menu.
SONIX Service Manual SSM – 001, Revision F Chapter 3: System Installation
29