UltraPlus X-9200HD PVR, Руководство пользователя

Страница: 50 / 86

50
3.2 Positioner Setting

Satellite : Select the satellite which you want to
search for the Service.
-
Press the LEFT/RIGHT ARROW button to select
the satellite.
- If you press the OK button, a complete satellite
list will be displayed.
- Select the wanted satellite name.
- If the desired satellite name is not listed then
select User Defined.

Tuner : Select tuner that you want to set
(Tuner 1/ Tuner 2).
If you have set
‘Loop-Through’
in the
menu
(Installation-Dish Setting-Tuner Connection),
this menu(Tuner) will be automatically disabled.

Frequency : Select the satellite frequency you want to use to check for a signal.

Positioner : Select the positioner.
- None : (No Positioner)
- Using DiSEqC 1.2 :
Move :
To move the dish, press LEFT/RIGHT
button.
Fine Move : To move the dish in smaller steps,
press the LEFT/RIGHT ARROW button.
Step : Set to positioner moving steps as 1, 2, 3, 4
Positioner Command : To use various positioner
commands, press the OK button. Then, available
positioner commands will appear.
- Using USALS :
Move :
To move the dish, press the LEFT/RIGHT
button.
Fine Move : To move the dish in smaller steps,,
press the LEFT/RIGHT ARROW button.
Step : Set to positioner moving steps as 1, 2, 3, 4
Dish Longitude : Enter the longitude position of
the antenna using the NUMERIC buttons.
Dish Latitude : Enter the latitude using the
NUMERIC buttons.
Go To : Press the OK button to rotate the dish to
the selected antenna position.

Dish Setting : Press the OK button to move to
Dish Setting
menu directly.

Service Search : Press the OK button to move to
Service Search
menu directly.