UltraPlus 920hd, Руководство пользователя, Страница: 43 / 53

43

MAC Address : This will display the MAC address of the STB Ethernet interface and is a fixed
assignment unique to each STB.

Control of the files via the network and your PC :
- Check the IP Address of the STB on the Network Setting menu.
- Press Enter button on your PC, after writing IP Address on the web browser address line. Ex.)
\\192.168.1.10\storage
- You can see the folder name of USB1 and USB2 in the Storage folder.
- USB1 : Front USB Storage Device
- USB2 : Rear USB Storage Device
- You can load and retrieve data between the PC and the STB via the browser

Dynamic settings (RED key)
- You can make your DDNS setting in this menu by
pressing the
RED colored button.
- For more details about your DDNS settings,
please ask your local DDNS service provider.

Wireless LAN can be supported by using the
‘USB to
Wi-Fi’
module connected (*Option)
- By pressing the BLUE colored button, you can
automatically find and do the settings for AP.
- For the details of Wireless Wi-Fi settings, please
refer to the additional AP manual.
NOTE : The speed of Wireless LAN is slower
than the Wired LAN. So, it could take
much more time when a file copy / move
functions are performed.
NOTE : Inevitably, only the limited types of Wireless LAN modules are supported. So, you
MUST check for the compatible / supported types BEFORE you purchase.
Currently supported types are : RT73 series, RT3070 series, RT2870 series.
3.5 System Recovery

System restore to factory default : Restore the
factory set values in case the user has encountered
some problems after changing parameters in error.
Press the
OK button to erase all services and restore
default setting.

Reset Configuration data : Maintain the
service data and reset the configuration data.

Reset Service data : Maintain configuration
data and reset the service data.

System restore to stored position :
Restore the stored values including service data and system
parameters. Press the OK button to restore all data.