17
WIRING DIAGRAM
WIRING DIAGRAM
The wiring diagram shown below is the standard wiring arrangement for Ultralift’s Linear-Motor Driven
products including Atlas, Phoenix, Titan, and Spartan range.
This should not need to be changed unless swapping to an integrated automation setup using contact closure.
Ports and their uses:
•
AC: 240 V, 50-60 Hz, 200 W
•
A1 & A2: Parallel Controller Ports (Bluetooth, IR, or Dry Contact Closure for automation)
•
1, 2, 3: Actuator/Column 1, 2, and 3 Ports
POWER CABLE
240 V IN
ACTUATOR 1 PORT
ACTUATOR 2 PORT
IR EXTENSION CABLE
DP1U CONSOLE
ULTRALIFT IR
CONTROLLER
(UIRC)
A1 PORT
A2 PORT
