Ultraflux Uf 811 CO, Руководство пользователя, Страница: 53 / 106

53
NT UF 811 CO GB (c) / March 2014
The relays can be tested individually: select the open or closed mode on the relay status line.
5.4.9 "Logger settings" menu (if activated)
Important: The modification in the number of variables must be
preceded by the logger being reset.
1) Resetting the logger
"YES" needs to be entered in the "LOGGER reset" field to reset the logger.
2) Confirming logger reset
The logger is deleted via a field requiring confirmation (protection against handling errors).
3) Number of logger parameters
Up to 30 variables can be recorded in the logger. The number of variables can be adjusted. Its maximum
autonomy is for 530,000 time-stamped readings.
4) Logger mode
The logger can record in 2 modes: "rolling" (first files deleted when the logger is full) or "Stop when full"
(the logger stops recording when it is full).
5) Logger increments
The recording period of the logger can be set from 1 s to 24 hrs: 1 s, 5 s, 10 s, 30 s, 1 min, 2 mins, 5 mins,
10 mins, 15 mins, 30 mins, 1 hr, 2 hrs, 6 hrs, 12 hrs and 24 hrs.
6) Logger autonomy
This field cannot be edited and indicates the logger's remaining autonomy.