manualshive.com logo in svg

Ultra electronics HYPERSPIKE HS-14, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Ultra electronics HYPERSPIKE HS-14 Скачать руководство пользователя страница 40

HyperSpike

® 

HS-14 RAHD Operation and Maintenance Manual 

Copyright © "RSB Group", Moscow, Krzhizhanovskogo str., 14/2

 

90169A-MAN-HS14RAHD 

Rev A 

35 

8.1. Failures Not Covered by This Warranty 

This warranty covers manufacturing defects.  The warranty 

DOES NOT

 cover: 

1) Damage caused by accident, misuse, abuse, product modification or neglect.
2) Damage incurred during shipment (you must claim these damages from the carrier).
3) Damage resulting from failure to operate the product in accordance with the instruction
manual. 
4) Damage resulting from attempted repairs by unauthorized personnel.
5) Claims based on any perceived agreement not explicitly stated in this warranty such
as conversations with service personnel or sales representatives. 

8.2. Limitation of Implied Warranties 

All implied warranties, including warranties of merchantability, are limited in duration to a 
period of one (1) year from the date of shipment from Ultra Electronics USSI. 

8.3. Exclusion of Certain Damages 

Ultra’s liability is limited to the repair or replacement, at our option, of any defective product, 
and shall in no event include incidental or consequential commercial damages of any kind.  
Some states do not allow the exclusion or limitation of incidental or consequential damages, 
so the preceding limitation or exclusion may not apply to you. 

For further information regarding this warranty, parts, or service, please contact Ultra 
Electronics USSI through one of the methods listed at the beginning of this warranty section.

Содержание HYPERSPIKE HS-14










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды