7
GB/IE
AXLE STANDS
§
Introduction
We congratulate you on the purchase of your new product. You have chosen a high quality product.
Familiarise yourself with the product before using it for the first time. In addition, please carefully refer
to the operating instructions and the safety advice below. Only use the product as instructed and only
for the indicated field of application. Keep these instructions in a safe place. If you pass the product on
to anyone else, please ensure that you also pass on all the documentation with it.
§
Instructions
Please read the instructions carefully and follow the safety advice. To avoid personal and property
damage, use the product carefully and only for the intended use. Damage caused by incorrect
handling or non-observance of the instructions is not covered by the warranty.
IMPORTANT: RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
§
Intended use
Only for private use - Jacking up a car for tire changes.
§
Technical specifications
Model number:
HG03845
Max. load:
2 tonnes
Hub height I:
24 cm
Hub height II:
26.7 cm
Hub height III:
29.5 cm
Hub height IV:
32.2 cm
Hub height V:
35 cm
Hub height VI:
37.7 cm
Safety instructions
Always check that the axle stands are in perfect working order. Never use damaged axle stands.
Use the axle stands only on a level, stable surface.
Never use the axle stands individually - always use both at once.
Before first, use, familiarise yourself with the axle stands and the folding machanism, and ensure
that the holding bolt and safety pin are seated correctly.
m
WARNING!
Always let the vehicle off the axle stands slowly and carefully.
Before beginning work on the vehicle, ensure that the axle stands and vehicle are stable.
Always use 2 axle stands for a vehicle, never more than 2.
Never use the jack on a vehicle that is already on the axle stands.
Never use the axles stands for 3-wheeled vehicles or for trailers.
