Ultimaker EXTRUSION UPGRADE, Руководство по установке

Страница: 6 / 27

6
YOUR UPGRADE KIT
1 Pre-assembled print head
2 Nozzle kit
3 Short spool holder
4 Print head shafts (X and Y)
5 Hex wrench 2 mm
6 Pre-assembled feeder
7 Calibration card
8 Build plate clamps (2x)
9 Geared feeder mounting plate
10 M3 ring (2x)
11 M3 x 10 mm screw (6x)
12 “+” stickers
13 Print head alignment tool (2x)
14 Print head axis (dis)assemble tool (2x)
15 Feeder motor
16 Grease
Check if all these parts are included before continuing. If not, contact your local reseller.
Additional tools needed:
•
Flat 1.5 mm screwdriver
• Socket wrench 5.5 mm or pliers for the lock nuts
13
12
11
8
6
4
5
16
3
15
2
1
9
10
7
14