The Ukey Keyless Systems are
designed to control unauthorized use
of any type of equipment.
Troubleshooting FAQ’s
Q: My system will not power up.
A: When powered up, the beeper sounds (beep
test) and all LEDs flash (LED test). If this does
not happen, check for a blown 30 amp fuse
and/or power going to the large red wire and
negative going to the large black wire. Replace
fuse and/or repair wiring going to unit.
Q: All of my LEDs flash constantly, how do I clear
this?
A: The only way to clear this is with a successful
master or user code. Enter the proper code then
Wait for the unit to accept it
. This should clear
the LEDs. What this usually means is that your
unit has been tampered with 6 or more times and
you should be concerned that someone is
tampering with your machine.
Q: If my machine has the battery disconnected,
will I lose my codes?
A: Absolutely not. The codes are stored in
memory for up to 10 years.
Q: Someone has damaged by keypad; can i
replace it?
A: Yes, you can. Simply peel the old one off,
unplug the cable and install a new
replacement. No codes will be lost.
Q: Will my battery run down when the keypad
blinks?
A: No, the LED takes a very small signal to
run, just like a car alarm.
Q: I am concerned about the durability of the
unit from vibration and moisture damages
A: The keypad has 10 yr fade-resistant ink
with a durable Lexan (Epoxy) coating. The
main unit is coated for moisture and the
enclosure is sealed.
Q: What else can I put a Ukey System on?
A: Anything that has a 12 or 24 volt dc
electrical system.
Q: What is the warranty?
A: The warranty is 1 year from the date of
purchase. (See warranty policy for details)
Ukey Keyless Systems
Owned & Operated by:
Lift Service Now
16807 FM 2920, Bldg E
Tomball, TX 77377
(281) 252-5438
Installation / User Manual
Ukey TS-1100
Содержание TS-1100
Страница 3: ......
