UIC Bezel5 Programmer’s Manual
Page.79/166
UDN PM098 Rev. 1.0
Copyright © 2013, Uniform Industrial Corp. All Rights Reserved
If SS/ES is enabled, each track data of magnetic stripe card that sent automatically in Self-Arm mode
will be wrapped by the SS/ES character.
Note: This command is only effective in Self-Arming mode.
4.3.12.
Fxy(46h x y)
-
Set Track 1, 2, 3 Prefix/Suffix Code, Preamble/Postamble Code
Command Packet
Byte 0
Byte 1
Byte 2 (max 5 bytes)
F
Type
Data (1 ~ 5 Bytes)
Command Type
Parameter (x)
Description
Example (Hex)
Example Data (y)
TK1 Prefix
09h 00h 07h 46h 41h 42h 45h 35h 30h 31h 3Ah
'BE501'
A
TK1 Prefix Disable (Default)
09h 00h 03h 46h 41h 00h 0Dh
'00'
TK1 Suffix
09h 00h 07h 46h 61h 42h 45h 35h 30h 31h 1Ah
'BE501'
a
TK1 Suffix Disable (Default)
09h 00h 03h 46h 61h 00h 2Dh
'00'
TK2 Prefix
09h 00h 07h 46h 42h 42h 45h 35h 30h 32h 3Ah
'BE502'
B
TK2 Prefix Disable (Default)
09h 00h 03h 46h 42h 00h 0Eh
'00'
TK2 Suffix
09h 00h 07h 46h 62h 42h 45h 35h 30h 32h 1Ah
'BE502'
b
TK2 Suffix Disable (Default)
09h 00h 03h 46h 62h 00h 2Eh
'00'
TK3 Prefix
09h 00h 07h 46h 43h 42h 45h 35h 30h 33h 3Ah
'BE503'
C
TK3 Prefix Disable (Default)
09h 00h 03h 46h 43h 00h 0Fh
'00'
TK3 Suffix
09h 00h 07h 46h 63h 42h 45h 35h 30h 33h 1Ah
'BE503'
c
TK3 Suffix Disable (Default)
09h 00h 03h 46h 63h 00h 2Fh
'00'
Set Preamble Code
09h 00h 07h 46h 50h 70h 72h 65h 30h 31h 7Eh
'pre01'
P
Preamble Code Disable (Default)
09h 00h 03h 46h 50h 00h 1Ch
'00'
Set Postamble Code
09h 00h 06h 46h 70h 50h 4Fh 53h 54h 21h
'POST'
p
Postamble Code Disable (Default)
09h 00h 03h 46h 70h 00h 3Ch
'00'
Table 4-35. Track Format Configuration Table
4.3.13.
LB0x(4Ch 42h 30h x)
-
Set Read Card Mode
Command Packet
Byte 0 ~ 2
Byte 3
LB0
Command Type, see Table 4-36