CX8942
C
OMMISSIONING
14
5.2.3
Configuration of the network interface
To carry out own settings of the IP addresses, the CX8942 has a web interface.
This can be addressed either via the LAN interface or the Wi-Fi interface of the
CX8942.
For the configuration, the CX8942 acts as a Wi-Fi Access Point (hotspot). You
require a mobile device with activated Wi-Fi for the configuration.
To start the Access Point, button 7 must be held down while the unit performs a
reset.
After that all LAN-specific settings are reset to the factory state.
The
pairing of the locking units remains
Open the Wi-Fi device menu of your mobile device
Keep the
button pressed
Tap the reset button
or optionally reconnect the LAN cable.
Continue to hold down the
button until a Wi-Fi network with the SSID:
"FSMLanConfig" is displayed in the Wi-Fi menu of your mobile device. This
can take several seconds.
Release the
button
Tap on the list entry "FSMLanConfig”
Enter the password
StartConfig
The web interface now starts automatically in a browser window.
Alternatively, it can also be opened via the IP address 192.168.4.1 in a web
browser.
For security reasons, be sure to assign a new secure password in the web
interface.
Starting via Wi-Fi
13
14
13
13
