C o p y r i g h t b y U h l - I n s t r u m e n t s M a n u a l
Seite 20
Menu/Display
Menu Panel Display
Controls
The menu panel display offers full access to many X3 parameters like percussion,
chorus/vibrato, keyclick, reverb,
factory presets, leakage, tapering. All parameters can be stored individually.
Use
Up/Down buttons
to scroll through menu items.
Use the
Data Entry
incremental encoder knob to change parameter values by turning the knob either right or
left. A changed parameter is indicated by an asterisk in the display. To
store
changed settings
press
the
Data
Entry
rotary knob for 2 seconds until the [Saved] message appears. Hereafter the asterisk disappears.
.
If you change more than one parameter, every single parameter change must be stored individually.
To find parameters which have not been stored, just use the Up/Down buttons to scroll through the
complete menu and look out for asterisks. Then press the Data Entry knob for 2 seconds to permanently
store each parameter still showing an asterisk.
Menu Up - Button
Menu Down -Button
Data/Entry Button
(Rotary- Button)
Display
