Ugur USS 85, Руководство по эксплуатации

Страница: 28 / 162

EN
A- THINGS THAT MUST BE KNOWN BEFORE USING YOUR
DISPENSER AND SECURITY WARNINGS
WARNING!
• Do not place your product to a place exposed to direct sunlight or infl uence area of the heat
sources such as stove, radiator core, oven, cooker, radiant and infrared. Otherwise, this may
cause performance decrease, damage of your product or make it become dysfunctional.
• Your product is set for operating at mains power of 220-240 Volt 50 Hz. Using your dispenser
with a diff erent voltage may cause it become dysfunctional and fire.
• Electrical installation must conform to national regulations.
• There must absolutely be a residual current relay and a fuse in your electrical installation for
preventing the risks of electrical shock and fire.
• Our company is not responsible for the failures and damage that may occur in case of using
without grounding.
• Place the product in a damp-free place with unobstructed air circulation.
• You must clean inside your product before the first use.
• After placing your product to its place, wait for one (1) hour without moving it before star-
ting using.
• If your product is installed under very cold weather conditions, then the waiting period
must be at least two (2) hours before starting to operate it.
• In case of prolonged blackouts, do not open the top door for preventing heat loss.
• Unplug your product in case of sudden blackouts. For starting again, plug in your product
20 minutes after the electricity is supplied. High voltage occurring at the moment of electri-
city supply may cause damage of your product and fire.
• Do not allow wild animals and pets to enter into your product or walk around it. It may da-
mage your product or cause death and injury of the animals. Furthermore, wild animals and
pets may cause fire by giving harm to the electrical installation.
• The product you’ve purchased is designed and manufactured for cooling water and storing
cold water only. Please do not use for other purposes.
• Your product is designed for using at indoor places. Do not use your product at outdoor
places.
• Product installation, placement, maintenance and cleaning must be done as stated in the
manual. Do not apply anything contrary to the manual. In case of any damage that may
happen in your product as the result of such use, warranty conditions will be invalid due to
user error.
• Place your product onto a fl at surface with no slope in order to prevent sliding or tilting of
your product.
• Operate your product only in usage position.
• Do not expose your product to direct sunlight.
• Carry and store your product at normal using position only in order to protect it from dama-
ges. Actions in contrary may cause loss of the warranty rights.
28