Ugur UMD 1450 D DF IZMIR, Руководство пользователя

Страница: 8 / 32

User Manual
l
– General Store Type Freezers and Fridges | User Manual – General Store Type Freezers and Fridges
8
EN
NOTE
The internal part of the
equipment must be dry before
placing products inside.
Make sure that there is air circulation
in the motor part.
Please keep in mind that all
electrical appliances are potential
sources of hazard, and pay attention to
all warnings made.
WARNING
Should be add 200-250 ml
water into the drain pipe
before starting the device
( Image K K ).
*This clause applies to
models containing the "DF"
statement.
2.2 – TECHNICAL SAFETY
R404a or R290 refrigerant flu-
ids are used in the manufacturing of
UMD IZMIR equipment depending on
the orders. You may learn what kind of
cooler fluid is used in your equipment
from the label at the back side of the
equipment. R290 refrigerant fluid is
environment friendly but inflamma ble.
Therefore, in handling and mounting
operations of the equipment, follow the
steps below if the cooler or electrical
equipment has been damaged.
•If there is any kind of source such
as fire, sparkle etc. that may lead to
in flammation at the environment
where the equipment is located,
keep your equipment away from such
sources. Otherwise, fire, explosion, etc.
may be experienced.
•Plug out the equipment and
ventilate the environment where the
equipment is located.
•Please contact the Authorized
Service.
The refrigerant gasses in this
equipment slightly increase the sound
of operation of the compressor. You
may hear the sound of air circulation
to gether with this sound. This
situation is normal and it does not
affect the working performance of the
equipment.
The outer frame of the equipment
may get warm during operation. This
situation is normal and it is caused by
the design of the equipment.
2.3 – DURING OPERATION OF
THE EQUIPMENT
This equipment is manufactured to
be used in stores such as supermarkets
etc. It is important to comply with the
articles stated below about the use of
the equipment with regards to safety,
performance and energy consumption.
•Your equipment is designed for
use in indoor environments. Our
company shall not be responsible due to
problems that may arise in the case
that you use your equipment in outdoor
environments.