INSTALLATION
SIRIUS
RANGE
USER
GUIDE
6
CONNECTION
-
FOR
LOCAL
MANUAL
OPERATION
There are 2 connections required – the fiber port and the mains supply cable. The fiber port
should be connected first. Connect and secure the fiber optic connector into the collar and
secure using the M5 locking screw.
Connect the PSU to the DC input jack socket on the illuminator, and connect the IEC plug to the
PSU. Plug the mains plug into the electrical supply socket. Switch on power. The LED Indicator
on the PSU will illuminate and the illuminator is ready for use. If no light is produced consult the
TROUBLESHOOTING section of this user guide.
CONNECTION
-
FOR
LOCAL
MANUAL
OPERATION
There are 3 connections required – the fiber
port, the remote dimmer cable and the mains
supply cable. The fiber port should be
connected first. Connect and secure the fiber
optic connector into the collar and secure using
the M5 locking screw. Connect the RJ45
connector on the end of the remote dimmer
cable as detailed below into the right hand
RJ45 socket (0-10V dimming) on the side of the
illuminator.
Connect the PSU to the DC input jack socket on
the illuminator, and connect the IEC plug to the
PSU. Plug the mains plug into the electrical
supply socket. Switch on power. The LED
Indicator on the PSU will illuminate and the illu-
minator is ready for use. If no light is
produced consult the TROUBLESHOOTING
section of this user guide.
