![UfiSpace S9501-28SMT Скачать руководство пользователя страница 28](http://html1.mh-extra.com/html/ufispace/s9501-28smt/s9501-28smt_hardware-installation-manual_3242819028.webp)
13
Cautions
Safety Notices
Caution! Shock hazard!
TO DISCONNECT POWER, REMOVE ALL POWER CORDS FROM UNIT.
Electrical Hazard:
Only qualified personnel should perform installation procedures.
Risques d’électrocution:
Seul un personnel qualifié doit effectuer les procédures
d’installation.
Warning:
Network Switch power supplies do not have switches for turning the unit
on and off. Before servicing,
disconnect all power cords to remove power from the
device. Make sure that these connections are easily accessible.
Avertissement:
Network Switch alimentations ne sont pas des interrupteurs pour
allumer l’appareil et en dehors. Avant l’entretien, débranchez tous les cordons
d’alimentation pour couper l’alimentation de l’appareil. Assurez-vous que ces
connexions sont facilement accessibles.
Caution:
Before mounting the device, ensure that the rack can support it without
compromising stability. Otherwise, personal injury and/or equipment damage may
result.
Caution:
Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
Warning:
Do not use optical instruments to view the laser output. The use of optical
instruments to view laser output increases eye hazard. Use only UL/CSA, IEC/EN60825-
1/-2 recognized pluggable modules.
Avertissement:
Ne pas utiliser d’instruments optiques pour voir la sortie du laser.
L’utilisation de instruments optiques pour afficher la sortie laser augmente les
risques oculaires. Utilisez uniquement UL/CSA, IEC/EN60825-1 /-2 reconnu modules
enfichables.
S9501-28SMT
Hardware Installation Guide | 2
5
Warning:
The equipment
should
only
be
use
d
with
in a restricted access area.
The equipment
should only be
operated
by
skilled
or
instructed person
s
.
The equipment and its modules should only be repaired, maintained or replaced by
skilled personnel.
Instructed person is a term applied to persons who have been instructed and trained
by a skilled person, or who
is
supervised by a skilled person.
Caution:
Only
Laser Class 1 optical transceiver
s
shall be used
.
Содержание S9501-28SMT
Страница 1: ...S9501 28SMT Disaggregated Cell Site Gateway Hardware Installation Guide R1 0...
Страница 29: ...www ufispace com...