www.goliathhardware.com.au
Tools:
Tape Measure, Pencil, Ruler, Drill/Driver
Make sure the following are present:
Step 1: Measure and mark cabinet
Step 0: Before you begin
Step 2: Separating the internal member
Materials:
Set of two Goliath Ball Bearing Full-Extension Drawer Slides sized to the inside depth of the cabinet.
Press lever to disconnect and separate internal
member from the rest of the drawer slide. Do this for
both drawer slides.
Align drawer units to where you want them to be on
the cabinet unit
With a pencil, measure and draw guides for the
positioning of the drawer runners on the cabinet unit.
Do the same for the other side of the cabinet unit.
Internal slide member
DRAWER SLIDE INSTALLATION GUIDE
