10
Note Direction.
Open battery cover at the bottom of transmitter. Install batteries.
Follow the direction of batteries designated in the inside of the battery box.
1.5V×4 AAA Batteries(not included)
Battery Cover
Assembly of the transmitter battery
②
①
Model Battery charging
Connect the attached charger with the model battery charging
input port, and then connect other USB output ports. When
charging, the charging indicator is flashing, and the indicator is
always on after charging. Do not put the battery in the model
when charging. The battery must be cooled before charging.
The battery contains less power when leaving the factory,
so it must be charged and saturated before use.
Battery
input port
Model Battery
Charger
output port
Charging
Charger box
Power
USB adapter (not included)
Please use the charging box provided with the product and make sure it is connected properly.
Warning: someone must be watching while charging.
Assembly of model battery
Remove the body
1) Pull out the body clips
