Ude PZ-600, Руководство пользователя

Страница: 7 / 14

N.3 MESSAGE
Message n.3 is exclusively from the PZ-600 desk
TIME / CONTINUOS:
1 TIME: It sounds only once.
CONTINUOS: Sound repeatly
11 7 610.500A Rev. 1
WZ-600 + PZ-600
QUICK OPERATION GUIDE
MESSAGES 1
The recording of the 3 messages is done through the audio input (REC) located in the front panel
of the WZ-600 module.
Set the REC volume control almost
to the minimum (to the left).
You can vary this setting depending
on the audio input level
Press REC to start recording
Press STOP to stop recording
Set the REC switch to OFF
MESSAGE
2
3
1 OFF CONTINUOS NORMAL
MESSAGE MESSAGE
REC
1 TIME ALARM VOL.
REG
VOL.
PLAY
REC STOP
PLAY ACTIVE
MIC
MESSAGE RECORDER
2
3
4
1
2
3
4
5
1
MESSAGE
2 3 1
OFF
CONTINUOS NORMAL
MESSAGE MESSAGE REC
1 TIME ALARM VOL.
REG
VOL.
PLAY
5
4
Recording by front panel microphone
MESSAGES RECORDING
2
Select the message to be recorded using the REC switch
- Position 1 (MESSAGE No. 1)
- Position 2 (MESSAGE No. 2)
- Position 3 (MESSAGE No. 3)
The Microprocessed MICRO-600 System allows the diffusion of 3 different messages, one minute maximum duration
each.
The recording of the 3 messages is done through the microphone located in the front panel of the WZ-600 module.
The n.1 and n.2 messages are launched automatically throught a closure of external contacts, located on the rear
panel of the WZ-600 module.
Also in these messages (numbers 1 and 2) you can configure their emission mode through the switches:
N.1 and N.2 MESSAGES