UCTRONICS B0106 is a 3.5” display with HDMI interface and Raspbian
touchscreen support. It’s designed for Raspberry Pi but also serves as a
general-purpose compact HDMI display and an alternative to those large
ones.
The Figure 1 shows the display module pin out and dimension. Connect
the 3.5-inch HDMI LCD to the Raspberry Pi board like the Figure 2
shows. (B010604 please follow the separate assembly instruction.)
Note:
1.Please unplug the HDMI connector before unplugging the screen
from the GPIO port.
2. You can push the on-board button near the micro USB port to adjust
and turn on/off the backlight.
Step1
Align the pin 1 of the edge connector between the LCD
display and Raspberry pi board
Step2
Connect the HDMI interface with the HDMI adapter board.
Step3
Power on the Raspberry Pi board
3.5” LCD HDMI Display
B010601: Display
B010604: Display with case
Model: B0106
Figure 1
Figure 2
VARIATIONS
INTRODUCTION
SPECIFICATION
HARDWARE INSTALLATION
85.60mm
3
1
55.98mm
+ +
4
2
1
2
3 NC
GND
NC
T_CS IRO GND
SCLK MISO MOSI
5V 5V
NC
4
19
20
25
26
+ +
25
19
+ + + +
26
20
+ + + +
Model number:
B010601, B010604(with case)
Display
3.5” (diagonal)
Native resolution
480×320 pixels
Video Transmission Interface
HDMI
HDMI input support
480×320 ~ 1920×1080 (scaled)
Power Input
Micro USB or GPIO
Dimensions
2.20”x3.37” (55.98mm x 85.60mm)
Audio
3.5mm audio jack (HDMI audio split)
Touch Screen Support
Raspbian (via SPI interface)
