Uconnect Touch 8.4, Руководство пользователя

Страница: 20 / 149

of pace. Press the “Shuffle” button on the touch-
screen a second time to turn this feature off.
Info
Press the “Info” button on the touchscreen to
display the current track information. Press the
“Info” button on the touchscreen a second time
to cancel this feature.
Tracks
Press the “trks” button on the touchscreen to
display a pop up with the Song List. The cur-
rently playing song is indicated by an arrow and
lines above and below the song title. When in
the “trks” List screen you can rotate the TUNE/
SCROLL knob to highlight a track (indicated by
the line above and below the track name) and
then push the ENTER/BROWSE knob to start
playing that track.
Pressing the “trks” button on the touchscreen
while the pop up is displayed will close the pop
up.
Audio
Refer to Radio Mode for adjusting the audio
settings.
AUX Mode
Overview
AUX (Auxiliary Mode) is entered by inserting an
AUX device using a cable with a 3.5 mm audio
jack into the AUX port or by pressing the AUX
button on the left side of the display.
Inserting Auxiliary Device
Gently insert the Auxiliary device cable into the
AUX Port. If you insert an Auxiliary device with
the ignition ON and the radio ON, the unit will
switch to AUX mode and begin to play when you
insert the device cable.
Controlling The Auxiliary Device
The control of the auxiliary device (e.g., select-
ing playlists, play, fast forward, etc.) cannot be
provided by the radio; use the device controls
instead. Adjust the volume with the VOLUME
And ON/OFF rotary knob, or with the volume of
the attached device.
NOTE: The vehicle radio unit is acting as the
amplifier for audio output from the Auxiliary
device. Therefore, if the volume control on the
Auxiliary device is set too low, there will be
insufficient audio signal for the radio unit to play
the music on the device.
Media Mode
Press the “Media” button on the touchscreen to
select the desired audio source: AUX.
Audio
Refer to Radio Mode for adjusting the audio
settings.
Bluetooth Mode
Overview
Bluetooth Streaming Audio (BTSA) or Bluetooth
Mode is entered by pairing a Bluetooth device,
containing music, to the Uconnect System.
Before proceeding, the Bluetooth device must
be paired to the Uconnect Phone to communi-
cate with the Uconnect System.
NOTE: See the pairing procedure in the
Uconnect Phone section for more details.
To access Bluetooth mode, press the
“Bluetooth” button on the left side of the display.
Seek Up /Down
Press and release the “Right Arrow” button
on the touchscreen for the next selection on the
Bluetooth device. Press and release the “Left
Arrow”
button on the touchscreen to return to
the beginning of the current selection, or return
to the beginning of the previous selection if the
Bluetooth device is within the first second of the
current selection.
19