Uconnect 3/3, Руководство пользователя

Страница: 49 / 90

Voice Control
About Voice Control
Instead of pressing the touchscreen to control your navigation
system, you can use your voice to control navigation.
For example, to switch to 2D view, you can say “2D view.”
To view a list of available commands, press the “Help”
button in the Main menu and then press “What can I say?”
Using Voice Control
WARNING!
ALWAYS drive safely with your hands on the wheel.
You have full responsibility and assume all risks
related to the use of the Uconnect features and appli-
cations in this vehicle. Only use Uconnect when it is
safe to do so. Failure to do so may result in an accident
involving serious injury or death.
The following example shows how to use voice control to
plan a journey to your Home address:
1. Push the “Voice Recognition” button on the steering
wheel to turn on the microphone.
You see a screen with examples of commands
you can say.
NOTE: Press the “Help” button in the Main menu then
press “What can I say?” to see a full list of commands you
can say.
2. When you hear a beep, say a command of your choice.
For example, you can say “Navigate home.”
For some phrases, you are asked for confirmation.
NOTE: For the best recognition of what you say, speak
normally without trying to articulate words in an unnatu-
ral way. If there is excessive road noise, for example, you
may need to speak in the direction of the microphone.
3. If the command is correct, say “Yes.”
If the command is incorrect, say “No” and repeat the
command after you hear the prompt and tone again.
Your navigation system plans a route from your current
location to your destination.
NOTE: To stop your navigation system from listening out
for further commands, say “Cancel.”
48 NAVIGATION MODE — IF EQUIPPED