Uconnect 3/3, Руководство пользователя

Страница: 27 / 90

BLUETOOTH MODE
Bluetooth Streaming Audio (BTSA) or Bluetooth Mode is
entered by pairing a Bluetooth device containing music to
the Uconnect system.
Before proceeding, the Bluetooth device must be paired
with the Uconnect Phone to communicate with the
Uconnect system.
See the pairing procedure within this manual.
Once the Bluetooth device is paired to the Uconnect
system, push the MEDIA button located on the faceplate.
Once in Media Mode, press the “Source” button on the
touchscreen and select “Bluetooth.”
NOTE: For mobile phone compatibility and pairing in-
structions, please visit UconnectPhone.com.
AUX MODE
AUX Mode is entered by inserting a AUX device using a
stereo cable with a 3.5 mm audio jack into the AUX port, or
by pushing the MEDIA button located on the faceplate.
Once in Media Mode, press the “Source” button on the
touchscreen and select “AUX.”
Inserting Auxiliary Device
Gently insert the Auxiliary device cable into the AUX Port.
If you insert a Auxiliary device with the ignition ON, the
unit will switch to AUX mode and begin to play when you
insert the device cable.
Controlling The Auxiliary Device
The control of the Auxiliary device (e.g., selecting playlists,
play, fast forward, etc.) cannot be provided by the radio;
use the device controls instead. Adjust the volume with the
VOLUME rotary knob, or with the volume of the attached
device.
The vehicle radio unit is acting as the amplifier for audio
output from the Auxiliary device. Therefore if the volume
control on the Auxiliary device is set too low, there will be
insufficient audio signal for the radio unit to play the music
on the device.
26 MEDIA MODE