manualshive.com logo in svg

UCL SWIFT SWIFT KR12, Руководство пользователя, Страница: 68 / 75

Поделиться
Скачать
UCL SWIFT SWIFT KR12 Скачать руководство пользователя страница 68

��

WHEN THE SPLICE LOSS

IS TOO HIGH

HOW TO DEAL WITH THE SPLICING PROBLEMS

It may have been caused by dirt or dust
on the surface of fibers. 

HOW TO

 

· Carefully clean the surface of the fibers.
· DO NOT clean the optical fiber after cutting to prevent   
    dust rom being gathered on optical fiber’s cross section.
· DO NOT push in the optical fiber when putting is on V-Groove.
    Optical fiber should be placed from top to bottom V-Groove.

Bad electrodes

HOW TO

 

· Keep the V-groove clean at all times.

The arrangement of the fibers can be interrupted 
by the dirtin the V�groove.

HOW TO

 

· Replace the electrodes.
    The tips are bent or contaminated if they are worn out.

HOW TO

 

· Check the set values of arc discharge amount and
     arc discharge time and reset them, if necessary.
· The machine is delivered after being set to the most
    optimized values from the factory.

Improper arc discharge or arc discharge time.

HOW TO

 

· Check if the proper splice mode for the fiber
    has been selected.

Inappropriate splice mode

Содержание SWIFT KR12












































































Отзывы:

Нет отзывов