manualshive.com logo in svg

UCL SWIFT SWIFT KR12, Руководство пользователя, Страница: 26 / 75

Поделиться
Скачать
UCL SWIFT SWIFT KR12 Скачать руководство пользователя страница 26

��

The contamination of the objective lenses surface may 
cause inaccurate observation of the fiber position, result-
ing in higher splice loss and poor performance of the
Swift KR��. Therefore, the two objective lenses have to be 
cleaned on a regular basis. Otherwise, the dust sticks on 
the surface and it may become irremovable eventually. 

MAINTENANCE OF SPLICE QUALITY

REGULAR MAINTENANCE

AND CLEANING

Object Lens Cleaning

It is crucial to perform inspection and cleaning on a regular basis
to maintain the splice quality of the Swift KR��.

�  Turn the power off before cleaning the object lens.
�  Remove electrodes
�  The lens in a circular motion from the center with an 
     alcohol-soaked soft cotton swab as below picture. 
     Remove remaining alcohol on the surface of the lenses 
     with dry and clean cotton swab.
�  Check to ensure there is no line, scratch or stain.
�  Re-assemble electrodes correctly.
�  Turn on the power and perform a diagnostic test.

Содержание SWIFT KR12












































































Отзывы:

Нет отзывов