NORA-W36 series - System integration manual
UBX-22021120 - R01
Regulatory compliance
Page 33 of 48
C1-Public
The evaluation of the end product shall be performed with the NORA-W36 module installed and
operating in a way that reflects the intended end product use case. The upper frequency
measurement range of the end product evaluation is the 10
th
harmonic of 5.8 GHz as described in KDB
996369 D04.
The following requirements apply to all products that integrate a radio module:
•
Subpart B
–
UNINTENTIONAL RADIATORS
To verify that the composite device of host and module comply with the requirements of FCC part
15B, the integrator shall perform sufficient measurements using ANSI 63.4-2014.
•
Subpart C
–
INTENTIONAL RADIATORS
It is required that the integrator carries out sufficient verification measurements using ANSI
63.10-2013 to validate that the fundamental and out of band emissions of the transmitter part of
the composite device complies with the requirements of FCC part 15C.
When the items listed above are fulfilled, the end product manufacturer can use the authorization
procedures as mentioned in Table 1 of 47 CFR Part 15.101, before marketing the end product. This
means the customer has to either market the end product under a Suppliers Declaration of
Conformity (SdoC) or to certify the product using an accredited test lab.
The description is a subset of the information found in applicable publications of FCC Office of
Engineering and Technology (OET) Knowledge Database (KDB). We recommend the integrator to read
the complete document of the referenced OET KDB’s.
•
KDB 178919 D01 Permissive Change Policy
•
KDB 447498 D01 General RF Exposure Guidance
•
KDB 594280 D01 Configuration Control
•
KDB 594280 D02 U-NII Device Security
•
KDB 784748 D01 Labelling Part 15 18 Guidelines
•
KDB 996369 D01 Module certification Guide
•
KDB 996369 D02 Module Q&A
•
KDB 996369 D04 Module Integration Guide
6.4.1
United States compliance statement (FCC)
NORA-W36 series modules have modular approval and comply with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1.
This device may not cause harmful interference, and
2.
This device must ac
3.
cept any interference received, including interference that may cause undesired operation.
⚠
Any changes or modifications NOT explicitly APPROVED by u-blox could cause the NORA-W36
series module to cease to comply with FCC rules part 15 thus void the user
’
s authority to operate
the equipment.
The internal / external antenna(s) used for this module must provide a separation distance of at least
20 cm from all persons and must not be co-located or operating in conjunction with any other antenna
or transmitter.
shows the FCC IDs allocated to NORA-W36 series modules.
