NINA-B2 series - System integration manual
UBX-18011096 - R05
Software
Page 15 of 35
C1- Public
Procedure:
The examples in this procedure have been created and tested on EVK-NINA-B2 using TeraTerm.
1.
Connect the supplied serial cable from the J8 connector on EVK-NINA-B2 to the USB port your
computer. For more information about setting up EVK-NINA-B2, see also EVK-NINA-B2 user
guide [4].
2.
Download and unzip the latest u-connectXpress software from u-blox
3.
Discover the COM port number for the USB Serial Port on your computer (MS Windows:
Start>Device Manager>Ports
). See also “Setting up the evaluation board” in the EVK-NINA-B2
user guide [5].
Updating u-connectXpress connectivity software
Procedure:
The examples in this procedure have been created and tested on EVK-NINA-B2 using TeraTerm.
1.
Setup the serial port connection as described in
2.
Enter Software version identification
AT+GMR
command to find out the current version of your
u-connectXpress software.
AT+GMR
"2.0.0-025"
OK
