NINA-B1 series - System integration manual
UBX-15026175 - R16
Software
Page 30 of 63
C1-Public
5)
Verify the transferred file with the “
c SOFTDEVICE [SoftDevice size] [SoftDevice CRC32]
”. The
size and CRC can be found in the json configuration file.
Figure 19: Example of SoftDevice information from the json configuration file
An OK response indicates a successfully flashed SoftDevice.
Figure 20: Screenshot shown on successful verification of the transferred file
Flashing the application software
1)
The command
x [Application address]
set the bootloader in file transfer mode. The application
address can be found in the json configuration file.
Figure 21: Example of the application information from json configuration file
