LENA-R8 series - System integration manual
UBX-22015376 - R02
Approvals
Page 108 of 116
C1-Public
4.5
UK Conformity Assessed (UKCA)
☞
The United Kingdom is made up of the Great Britain (including England, Wales and Scotland) and
the Northern Ireland. The Northern Ireland continues to accept the CE marking. Following notice
is applicable to the Great Britain only.
The LENA-R8 series modules have been evaluated against the essential requirements of the Radio
Equipment Regulations 2017 (SI 2017 No. 1206, as amended by SI 2019 No. 696). To satisfy the
essential requirements of the UK Legislation, the modules are compliant with the following standards:
•
Radio Spectrum Efficiency (Article 6.2):
o
EN 301 511
o
EN 301 908-1
o
EN 301 908-13
o
EN 303 413
•
Electromagnetic Compatibility (Article 6.1b):
o
EN 301 489-1
o
EN 301 489-19
o
EN 301 489-52
•
Health and Safety (Article 6.1a)
o
EN 62368-1
o
EN 62311
⚠
Radiofrequency radiation exposure information: this equipment complies with radiation exposure
limits prescribed for an uncontrolled environment for fixed and mobile use conditions. This
equipment should be installed and operated with a minimum distance of 20 cm between the
radiator and the body of the user or nearby persons. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter except as authorized in the
certification of the product.
⚠
The gain of the system antenna(s) used for the LENA-R8 series modules (i.e. the combined
transmission line, connector, cable losses and radiating element gain) must not exceed the values
reported in the Declaration of Conformity for mobile and fixed or mobile operating configurations
The conformity assessment procedure for the modules, referred to Part 3 of the Radio Equipment
Regulations 2017, has been followed.
Guidance about using the UKCA marking:
https://www.gov.uk/guidance/using-the-ukca-marking
