Ublox EVK-U201SARA Скачать руководство пользователя страница 2

SARA-U2 series EVK - User Guide 

UBX-14001743 - R05 

 

 

 

 

Page 2 of 21

 

 

Document Information 

Title 

SARA-U2 series EVK 

Subtitle 

Cellular evaluation kit  

 

Document type 

User Guide 

 

Document number 

UBX-14001743 

Revision and date 

R05 

31-Oct-2017 

Disclosure restriction 

 

 

Product Status  

Corresponding content status  

Functional Sample 

Draft 

For functional testing. Revised and supplementary data will be published later. 

In Development / 
Prototype 

Objective Specification 

Target values. Revised and supplementary data will be published later. 

Engineering Sample 

Advance Information 

Data based on early testing. Revised and supplementary data will be published later. 

Initial Production 

Early Prod. Information 

Data from product verification. Revised and supplementary data may be published later. 

Mass Production / 
End of Life 

Production Information 

Final product specification. 

 

This document applies to the following products: 

Name 

Type number 

Modem version 

Application version 

PCN reference 

EVK-U201SARA 

EVK-U201SARA-0-00 

23.60 

A01.06 

UBX-17058162 

EVK-U26 

EVK-U26-00S-01 

23.20 

A01.01 

UBX-15013844 

 

EVK-U26-00S-02 

23.41 

A01.01 

UBX-15020745 

EVK-U27 

EVK-U27-00S-01 

23.20 

A01.01 

UBX-16006754 

 

EVK-U27-00S-02 

23.41 

A01.01 

UBX-15020745 

 
 
 
 
 
 
 
 
 
 

u-blox reserves all rights to this document and the information contained herein. Products, names, logos and designs described herein may in 
whole or in part be subject to intellectual property rights. Reproduction, use, modification or disclosure to third parties of this document or 
any part thereof without the express permission of u-blox is strictly prohibited. 
The  information  contained  herein  is  provided  “as  is”  and  u-blox  assumes  no  liability  for  the  use  of  the  information.  No  warranty,  either 
express or implied, is given, including but not limited, with respect to the accuracy, correctness, reliability and fitness for a particular purpose 
of the information. This document may be revised by u-blox at any time. For most recent documents, visit www.u-blox.com. 
Copyright © 2017, u-blox AG 

Trademark Notice 

u-blox is a registered trademark of u-blox Holding AG in the EU and other countries. 
Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. 
All other registered trademarks or trademarks mentioned in this document are property of their respective owners.

 

 

Содержание EVK-U201SARA























Отзывы: