WWDZWx User Manual
Date:9-Jun-2021
Ubitech Ltd.
Version:0.3
10
9
WORKING MODE SUPPORT
9.1 Standalone Mode
-
By default, Custos WWD does not belong to any Z-Wave Network, in this status, it only supports Classic Inclusion /
SmartStart operations to join into Z-Wave Network.
9.2 Mesh Network Mode
-
Custos WWD is added into a Z-Wave Network and it can join full benefits of Z-Wave technology.
-
Supported function as Water Leak Detection, Temperature Report, SmartStart, Classic Inclusion, Exclusion & Factory Default
Reset.
-
Custos WWD also can associate with Custos BVS to shut off the Water Valve when detected Water Leak.
9.3 Factory Default Reset Mode – Only works in Mesh Network Mode
-
Factory Mode only can be executed after Custos WWD is included into Z-Wave Network (in Mesh Network Mode)
9.4 Water Leak Sensor & Alarm
-
Water Leak Alarms refer to two Water Detection Probes “Built-in & Remote Figure 9A”
-
Custos WWD also can send Battery Report and Temperature Report to Z-Wave Gateway.
Water Detection Probe
Socket for
Remote Probe
Figure 9A
