Ubiquiti UVC-G3-AF, Руководство пользователя, Страница: 33 / 56

29
Chapter 9: Settings UniFi Video User Guide
Ubiquiti Networks, Inc.
Chapter 9: Settings
(The Settings section is available to administrators only.)
The Settings section provides you with important system
information and configuration options for your NVR.
System Configuration Click this button to configure your
NVR’s settings. Refer to “System Configuration” on page
30 for detailed information on System Configuration.
Get Support File Click this button to generate a support
file for use by Ubiquiti customer support. This file only
needs to be generated at their request.
Download Configuration Click this button to download
your NVR’s configuration to a file. (This doesn’t include
recordings). The configuration file is only used by the
Setup Wizard when installing a new NVR.
Revert Click this button to cancel all changes you have
made on the Settings page.
Save
Click this button to save all changes you have made
on the Settings page.
UniFi Video Cloud
Connect To My Ubiquiti Account/Disconnect From My
Ubiquiti Account
Click to connect or disconnect your
UniFi Video installation from your Ubiquiti account. This
enables or disables the free cloud access to your UniFi
Video installation.
Camera Password
Camera Password The camera password, by default, is
generated by UniFi Video’s initial configuration wizard.
Click this field to view the password in plain text, in the
event you need to access a specific camera. You can also
use this field to change the password used to access
individual cameras. To save any password changes, you
must also click
Save in the upper right.
Note: This change will only apply to cameras that
are currently managed by and connected to the
UniFi Video server.
Camera Adoption Token A random adoption token can
be generated to aide in the rapid adoption of multiple
cameras. To use this feature, click
New Token and a token
will be generated in the field. The token is valid for 30
minutes from its generation and can be copied/pasted
into the camera’s web UI along with the IP address of the
UniFi Video server for rapid camera management.
Note: The Adoption Token option only exists on
cameras with firmware version 3.8.3 or newer.
Time & Date
Timezone Select the local time zone where the UniFi
Video NVR is located.