Ubiquiti UVC-G3-AF, Руководство пользователя, Страница: 16 / 56

12
Chapter 2: Cameras UniFi Video User Guide
Ubiquiti Networks, Inc.
Sensitivity Level
Motion Spike
Motion Trails
Sensitivity Slider
Sensitivity Level (0-100)
Click to refresh the camera image that appears in
the zone preview.
Use this button to delete the current zone. Click
an area of the camera feed to define another zone
after deleting the existing zone.
Entry Door
Enter a name or brief description of the zone you
are creating, in the text field provided. In this
example,
Entry Door is used.
Click Save when you are done configuring and
naming your new zone.
Click Revert to cancel all changes and restore the
previous settings.
Status
CPU (% Utilization) Displays the camera’s CPU utilization
recorded over 24 hours with high, low, and average points
highlighted. Red indicates the highest point, green is the
average, and blue is the lowest point during sampled
intervals.
Memory (% Utilization) Displays the percentage of the
camera’s memory utilization over a 24-hour period.
Network (Kbytes/sec) Displays the network traffic for the
selected camera over the last 24 hours. Graph is expressed
in kilobytes per second.
Disk (Mbytes)
Displays the amount of disk usage for the
selected camera over the last 24 hours. Graph is expressed
in total megabytes.
Manage
Configuration
Host Displays the local IP address configured for the
camera you are currently viewing.
Alias Displays the device name configured for the live
feed window for each camera. This is different from the
name described for
“On Screen Display” on page 10 .
Controller Settings
Controller Host The IP address that the camera should
use to communicate with the controller. This setting is
typically used in environments where the UniFi Video
server has multiple active network interfaces.
Controller Port The port that the camera should use to
communicate with the controller. Beginning with version
3.8.0, this has been separated from the web management
port (default 7443) for security purposes.
Unmanage
Click
Unmanage
if you no longer want to manage
the selected camera. If you wish to remove unlocked
recordings for that particular camera as well, check the
box labeled
Remove Unlocked Recordings .