Ubiquiti UniFi WiFi BaseStation XG, Быстрый старт

Страница: 13 / 19

13.
14.
15. Repeat steps 1-14 to connect an Ethernet cable to the 1 GbE port if one of the
following conditions applies:
You will use the 1 GbE port for bridging.
You will use the 1 GbE port for 802.3bt PoE.
You will use the included Gigabit PoE adapter to power the UWB-XG.
Note: By default, the UWB-XG is set to 15 dBi for its small-cell gain. To switch to
its large-cell gain of 10 dBi, use the UniFi Network Application.
Connecting Power
IMPORTANT: Using the 10GbE port requires enabling ow control on the
upstream switch port’s con guration for maximum performance.
UWB-XG Quick Start Guide