Ubiquiti UF-OLT-4, Быстрый старт, Страница: 3 / 14

MGMT LED
GPON (Ports (PON 1- 4)
SFP+ (Port 1)
MGMT Port
Console Port
USB Port
Reset Button
Green/Flashing 1G Link/Activity
White/Flashing 10G Link/Activity
Off No Link
Amber/Flashing 10/100 Link/Activity
Green/Flashing 1000 Link/Activity
Gigabit Passive Optical Network ports support up to 128 clients on each port.
Hot-swappable SFP+ port supports 1G or 10G connections.
10/100/1000 Ethernet port used for out‑of‑band management. For firmware
version 4.1 and newer, it is set to DHCP Client with the fallback IP address,
192.168.1.20/24.
Note: Previous firmware versions default to a static IP: 192.168.1.1.
RJ45 serial console port for Command Line Interface (CLI) management. Use an
RJ45-to-DB9, serial console cable, also known as a rollover cable, to connect the
Console port to your computer. (If your computer does not have a DB9 port, then
you will also need a DB9 adapter.) Then configure the following settings as
needed:
Baud rate 57600
Data bits 8
Parity NONE
Stop bits 1
Flow control NONE
Reserved for future use.
UF-OLT-4 Quick Start Guide