Hardware Overview
Bottom View
Technology
Cable Door
Rear Housing
Ethernet Port
Release
Button Slot
Mounting Bracket
Release Button
Reflector
Alignment Pins
Reset Button
Antenna Feed
Radome
Reset Button
To reset to factory defaults, press and hold the
Reset button for more than 10 seconds while the PowerBeam
is powered on. Alternatively, the PowerBeam may be reset
remotely via a Reset button located on the bottom of the
Gigabit PoE adapter.
Release Button
After you assemble the PowerBeam, check
the Release button; it should be fully engaged in the Release
Button Slot of the Rear Housing. This ensures that the Antenna
Feed is locked into place. If you need to remove the Antenna
Feed, you must depress the Release button first.
