13. Adjust the elevation angle.
a. Loosen the four Hex Bolts on both sides of the
PowerBeam.
b. Pivot the PowerBeam until the Elevation Indicator shows
the desired elevation angle.
c. Tighten the four Hex Bolts.
20
°
20°
Elevation
Indicator
Connect the power using one of the following options:
• Using the included Gigabit PoE Adapter: Go to Connecting
to the PoE Adapter.
• Using a separate PoE switch: Connect the Ethernet cable
from the PowerBeam’s Ethernet port to a PoE‑enabled
Ethernet port on the switch.
WARNING:
The switch port must comply with the
power specifications listed in the Specifications
section of this Quick Start Guide.