Ubiquiti PowerBeam AC Gen2, Быстрый старт, Страница: 14 / 22

PBE-5AC-Gen2 Quick Start Guide
https://dl.ubnt.com/qsg/PBE-5AC-Gen2/PBE-5AC-Gen2_EN.html[4/17/2020 8:58:22 AM]
1. Connect the Ethernet cable from the device to the POE port of the PoE adapter.
2. Connect an Ethernet cable from your LAN to the LAN port of the PoE adapter.
3. Connect the Power Cord to the adapter, and then plug the Power Cord into a power outlet.
Mounting the PoE Adapter (Optional)
1. Remove the PoE Mounting Bracket from the adapter, place the bracket at the desired location, and mark the two holes.
2. Pre-drill the holes if necessary, and secure the bracket using two fasteners (not included).
3. Align the adapter’s slots with the tabs of the PoE Mounting Bracket, and then slide the adapter down.
Accessing airOS via Wi-Fi
Verify connectivity in the airOS® Configuration Interface using the UNMS™ app or Web Portal. Both are available for 15 minutes
immediately after you power on the device. If necessary, you can power cycle the device to re-enable its Wi-Fi.
UNMS App
1. Download the UNMS app.
2. Connect your device’s Wi-Fi to the SSID named: <model>:<MAC Address>