Introduction
Thank you for purchasing the Ubiquiti Networks
™
NanoBeam
™
.
This Quick Start Guide is designed to guide you through
the installation, and show you how to access the airOS®
Configuration Interface. This Quick Start Guide also includes the
warranty terms and is for use with the
NanoBeamM2, model
NBE-M2-400, and the NanoBeamM5, model NBE-M5-400.
If you want to add a radome to enclose the Dish Reflector,
Ubiquiti Networks offers the NanoBeam Radome, 400 mm,
model NBE-RAD-400 as an optional accessory. Product details are
available on our website at www.ubnt.com/airmax
Package Contents
or
Dish Reflector
NBE-M2-400
Antenna Feed
NBE-M5-400
Antenna Feed
*
20
10
10
0
Rear Housing
Dish Bracket
Pole Clamp
U-Bolt
High-Performance
airMAX
®
Bridge
Models:
NBE-M2-400, NBE-M5-400
Flange Nuts
(M8, Qty. 2)
PoE Adapter
(24V, 0.5A)
Power Cord
Quick Start Guide
* The NBE-M5-400 Antenna Feed has a thin gray ring around the center of
the cap to differentiate it from the NBE-M5-300 Antenna Feed.
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet
cable and earth grounding must be used as conditions of product warranty. TOUGHCable
™
is designed for outdoor installations. It is the customer’s responsibility to follow local country
regulations, including operation within legal frequency channels, output power, and Dynamic
Frequency Selection (DFS) requirements.
