ASSEMBLY INSTRUCTIONS
DINING SET - TABLE
RONA CODE: 79275002
ITEM NUMBER: TGA65SG
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PARTS LIST
PART
NO.
PART CODE
PART
Q’TY
1
2
3
4
1
4
2
1
5
6
7
8
9
2
12
12
12
1
TGA65SG-CS01
TGA66SG-CS02
TGA65SG-CS02
62TGA65SGY101
17C01D0710001
17FD05040301
1800337001
17C17D1302001
17KAA0101----Y4
TABLE TOP
LEG
SUPPORT
CENTER CONNECTOR
WITH RING
SCREW ST4.2*10
BOLT M6*30
WASHER d6.5*D13*1.0
BOLT CAP M6
HEX.KEY WRENCH 4MM
Step 1:
Place the table top (#1) onto a non-abrasive
surface, such as a carpet, with its underside facing
up. Insert the legs (#2) and the supports (#3) into
the plastic holders attached on the underside of
the table top (#1) rim. See Figure 1.
Do not sit or stand on this table.
A weighted umbrella base must be used when using an umbrella with this table.
Do not discard any of the packaging until you have checked that you have all the parts and pack of fittings.
Keep children away during assembly. This item contains small parts which can be swallowed by children.
Children should always be under direct adult supervision while using the product.
Retain the assembly instructions for future reference.
PAGE 1 OF 2
COURTYARD CREATIONS INC.
!
!
!
!
!
FIGURE 1
You will need the following tools:
- Phillips Screwdriver (Not Included)
- Hex. Key Wrench (See Part #9)
