1. Remove cable ties
A
Cut the cable ties that secure the kick stand(s) to the frame. Put the kickstand
down and rest the bike on the kickstand.
A
Cut the cable ties that secure the foot pegs to the frame.
4. Fit rear indicators (turn signals)
A
Remove the rear indicator lights from
their fixings.
A
Install rear indicators to their
respective side on rear light bracket.
Pay attention to the orientation – the
indicator with a long cable is fitted to
left side of bike, the short cable goes
to right side of bike.
A
Insert the thread through the mount
hole ensuring the nut and two washers
are on the inner side. Lights should
face straight back once installed.
Use a 17mm spanner to tighten the
fastening nuts.
3. Align the headlight
A
Loosen the two lower screws that
attach the headlight clamps to the
handlebars using a 3mm Allen key.
A
Tilt the headlight to aim forward so
the dot stickers are aligned and
re-tighten the two screws.
2. Align the handlebars
A
Loosen the side bolts on the stem
with the 5mm Allen key. Straighten
the handlebar in line with the front
wheel. The stickers should line up
as well.
A
Once aligned, re-tighten side
bolts, alternating as you tighten to
prevent damage to the threads.
(Fasten to 15Nm if you have a
Torque wrench.)
5. Adjust the mirrors
A
Loosen the mirror mount bolts, using a
4mm Allen key. Rotate the mirrors into
position. Re-tighten the mount bolts to
hold the mirror stems firmly in place.
6a. Install the power supply
A
IMPORTANT:
inspect the power supply; contact UBCO if there is any transit damage.
A
Remove the battery strap from the frame and use the securing key to retract the
power supply lock. Carefully lower the power supply into place, with the power socket
on the right-hand side of the bike.
A
Plug the bike’s power supply plug into the power socket and engage the power
supply lock.
A
Secure the battery strap as shown at the right (6b).
Left
bar
Power Supply
Right
bar
1
3
2
KIA ORA
HELLO.
6b. Secure the battery strap
A
Velcro side up, tuck the end of the battery strap under the left hand bar, central
to the power supply.
A
Carry the strap over the power supply and tuck it under the right hand bar. Feed
the strap back through the clip and centre the clip.
A
Tighten the strap and secure it closed.
Scan this QR code to watch
our bike assembly video.
If you don’t feel confident
putting your bike together,
contact us for help.
If your 2X2 has arrived in the box,
here’s how to set up your new ride.
Lift up the seat to find a tool kit with all the tools you
need. A pair of scissors or a knife will also be handy
and a torque wrench if you have one.
OPERATING INSTRUCTIONS
STEP 1:
Turn on the 2X2
Locate the key fob in the
underseat tool kit. Power
the bike by pressing the
button on the key fob
1.5 seconds. The display
will light up and the
headlight will turn on.
See the complete
instructions in the User
Manual on page 16.
STEP 2:
Download the UBCO App
You can download the
UBCO App to control the
settings of your 2X2 and get
critical updates delivered
wirelessly. Simply search for
UBCO in your phone’s app
store and download it for
free. Make sure Bluetooth
is activated on your mobile
phone when connecting the
app to your 2X2.
STEP 3:
Check power supply charge
Your power supply will arrive with
partial charge, enough to ride for a
few minutes. Be sure to fully charge
the power supply before you plan a
longer ride.
STEP 4:
Before you ride
Ensure you’ve read the user manual
and are familiar with how to use
the bike and the proper safety
precautions. Always wear a helmet.
Once you’ve educated yourself and
are ready to ride, start her up and GO!!!
Key fob
Securing key
Find UBCO online:
ubcobikes.com
fb.com/ubcobikes
instagram.com/ubcobikes
youtube.com/ubcobikes
Join the UBCO Owners group at
facebook.com/groups/ubcoowners
for
insider tips and tricks from our community.