23
UAV-1001006-001
ECCN 7A994
Disabled, CSID always set to 1 (Callsign)
Enabled, CSID alternates between 1 (Callsign) and 0 (Flight Plan ID)
Note: CSID should always be "Enabled", unless there is a special
circumstance requiring it be set to "Disabled".
8.2.6 Anonymous Mode
When checked, this enables the EchoUAT to transmit a self-assigned ICAO
and sets the Call Sign to
a random string such as “PINGFDF8“ when the
squawk code matches the defined VFR squawk code. Note that
anonymous mode is only active if a flight plan has not been filed (per AC
20-165).
Tip: Anonymous Mode must be
“DISABLED” for the FAA Performance test
flight in order for the FAA to register the flight to the aircraft’s Call Sign.
8.2.7 Emitter Category
To assist ATC tracking of aircraft, an aircraft category can be transmitted.
Select the aircraft category that most closely matches the aircraft.
Emitter Category
Light Airplane
Rotorcraft
Small Airplane
Glider / Sailplane
Large Airplane
Lighter Than Air
Large Airplane with High Vortex
Parachute
Heavy Airplane
Ultralight
Highly Maneuverable Airplane
UAV
Space Craft
Tip: Fixed wing with a maximum takeoff weight less than 15,000 lbs are
Light Airplanes.
8.2.8 VFR Squawk code
This sets the default VFR squawk code. E.g. 1200 for the USA.
8.2.9 ADSB-In Capability
Sets the ADS-B in equipment capability reporting. EchoUAT is capable of
receiving on frequencies. The recommended setting is “Both UAT and
1090”.
Содержание echo
