uAvionix echo, Инструкция по установке и руководство пилота

Страница: 14 / 49

14
UAV-1001006-001
ECCN 7A994
!
itself and does not need to be kept away from other devices for this
reason.
•
Avoid sharp bends and placing the cables too near to the aircraft
control cables.
•
Secure the transceiver to the aircraft via the four (4) mounting holes.
It should be mounted on a flat surface.
•
If possible, care should be taken to mount EchoUAT in a location with
the top case being visible for initial or periodic inspection of the LED
status lights.
Note: Installation of the echoUAT must be in accordance with AC43.13-2B,
Chapter 1
7.4 Connections
Whenever power is supplied to the transceiver, a 50ohm load
must be provided to the SMA connection. You can use the
supplied antenna or a commercially available 50ohm load.