uAvionix echo, Инструкция по установке и руководство пилота

Страница: 22 / 49

22
UAV-1001006-001
ECCN 7A994
•
Receive Only: Disables transmission but continues to receive and
provide ADS-B data to a GDL90 compatible display or application.
•
Standby: Disables both the transmit and receive functions. GDL90
position data (GPS) is still available from the device.
8.2.2 Aircraft Address Programming
The ICAO address is a 24-bit number issued to the aircraft by the
registration authority of the aircraft. These addresses are usually written as
a 6-digit hexadecimal number, although you may also encounter one
written as an 8-digit octal number. The echoUAT understands the
hexadecimal format, so you must first convert an octal number to
hexadecimal before entering.
Tip: By using the N-Number Look Up function on https://www.faa.gov ,
locate and use the “Mode S Code (base 16 / hex)” value.
8.2.3 Call Sign
The CALL SIGN can be up to an 8 digit code that corresponds to the tail
number of the aircraft. (0-9, A-F).
Note: This is typically your aircraft N-number, unless otherwise advised by
the FAA or ATC.
8.2.4 Flight-plan ID
Flight Plan ID, if provided, is used in accordance with product specific
transmission requirements. CSID Logic is applied to determine if the Flight
Plan ID is transmitted.
Flight Plan IDs are intended to contain Mode 3/A (12-bit) or expanded (18-
bit) codes, and shall only contain between 4 and 6 characters, consisting of
ASCII encoded values for digits 0-7.
Tip: Generally, this field will be left blank, unless otherwise advised by the
controlling authority.
8.2.5 CSID Logic
Specifies Call Sign Identification (CSID) transmission behavior. Always set
CSID Logic
to “Enabled” for 91.227 Compliance. A setting of “Disabled”
will result in a failure to generate an ADS-B Performance report.
Description