uandksound M6 Series, Руководство пользователя

Страница: 10 / 28

PERFORMANCE SPECIFICATIONS
Low-frequency oriented design
30 Hz - 250 Hz
400(W) X 478(H) X 420(D) mm.
SUB AMP POWER
Built-in 2400 watt class D Amplifier
ENCLOSURE
Fully engineered, MDF enclosure. Oriented design.
Powered subwoofer
FINISHES
Uandksound basic finishes is available for this product.
The standard finish for this product is black matte paint.
WWW.UANDKSOUND.COM
AMPLIFIER DISPLAY
A. BLUE LIGHT - Power Mode is ON
B. RED LIGHT -This indicate standby or a fault condition. Standby
(Continue to the red light and turn on when signal input) Excessive
Operating Temp (Continue to the red light and is no effected by
signaI input until the temperature dropped below 70 degrees)
Excessive Current/ Short Circuit (Continue to red light and is no
effected by signal input until solve the problem and power on again).
LEVEL CONTROL
This control adjusts input sensitivity effectively increasing or decrea-
sing output volume level.
PHASE ADJUSTMENT CONTROL
This control allows from an inffinitely variable adjustment of the
acoustical phase from 0—180 degrees.
PEQ SWITCH
Selects the switch that will turn on/off the EQ function. “ON” setting
that the EQ function effectiveIy. “OFF” setting that close the EQ
function if you do not need it.
AC VOLTAGE SWITCH
The unit set at the factory for 230V operation; simply connect the
included IEC power cord to your waII outlet. For 115V operation, move
the voltage selector switch to the 115V position. When operation at
115V the internal fuse located in the IEC socket should aIso be chan-
ged. In most 115V aplications a separate power cord will be required
and is not included.
AC POWER INPUT PLUG
Connect supplied power cord here. Make all other connections to the
subwoofer before connecting the power cord to a wall outlet.
AC MAINS SWITCH
This switch wilI connect/ disconnec AC power to/from the subwoofer.