INSTALLATION INSTRUCTIONS FOR 12 VOLT
BORDER LIGHT
MODEL 8202
FOR USE ONLY WITH LOW VOLTAGE LANDSCAPE POWER UNITS THAT DO NOT
EXCEED 25 AMPS, 15 VOLT MAX.
WARNING:
Border luminaires must be installed in accordance with
the National Electrical Code (NEC) and local codes. Failure to do so
will void the warranty and may result in serious injury and/or damage to the Border luminaire.
SAFETY WARNING:
Luminaire can become very hot depending on lamp wattage used.
Lens and metal around lamp can become hot enough to blister hands. Particular care
should be taken not to locate luminaires where small children can reach them if high
wattage lamps are used.
LUMINAIRES ARE NOT TO BE INSTALLED WITHIN 10 FT. (3.05M) OF A
POOL OR SPA. SECONDARY CABLE IS NOT TO BE BURIED MORE THAN
6". WHEN USING MULTIPLE LUMINAIRES, LOAD IS NOT TO EXCEED
TOTAL WATTS OF TRANSFORMER RATING. DO NOT USE EXTENSION
CORDS ON POWER UNITS.
NOTE:
Always use UL recognized wire connectors for connections.
NOTE:
Save these instructions for future reference.
BORDER LIGHT IS UL LISTED FOR ABOVE GROUND INSTALLATION ONLY.
