7
Before Using
·
Adjust the leveling feet of the analytical balance until the air bubble in
the indicator is centered.
·
Warm up for 30 to 60 minutes after starting up to improve the stability
of weighing.
·
Check the accuracy of the reading with the weight. If there is any
deviation, please follow the calibration method below to calibrate the
balance.
4.1 Leveling the balance
Accurate horizontal positioning necessary for repeatable measurements
and exact results. To compensate for small irregularities or tilts at this
location, the instrument needs to be leveled.
Adjust the leveling feet of the analytical balance until the air bubble in
the indicator is centered. The level indicator is located under the cover
towards the rear of the analytical balance.
