U.S. Solid USS-DBS01 Series Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 37

U.S. Solid USS-DBS01 Series Скачать руководство пользователя страница 10

9

a.

Airflow from air conditioners, fans, doors, or windows

b.

Vibrations from surrounding or nearby equipment

c.

Direct sunlight or radiation

4.

Do not use the balance anywhere exposed to explosive,

combustible, or corrosive gases.

5.

Do not use the balance in areas with high humidity or high levels of

dust

6.

When moving from a cooler to a warmer place, the accuracy and

reliability of the scale will be influenced by the moisture
condensation inside the balance. In order to eliminate this
influence, it is best to leave the scale unplugged in its new location
for at least two hours before next use.

7.

Keep the balance clean.

8.

Do not leave material on the balance when not in use.

Unpacking and inspection

Check that all of the items indicated below are included in the package
and that nothing has been damaged:

·

Balance

·

Pan

·

Power Cable

·

External Calibration weight

·

Manual

In case the balance or any component is damaged during transport,
tell your transportation agent immediately in order to process claims
within the proper time frame.

«
...
8
9
10
11
12
...
»

Содержание USS-DBS01 Series






































Отзывы:

Нет отзывов