13
2. Compare
Proceed to verify device(s).
Scroll to select "2. Compare", then press "OK" to start the verification process.
3. Copy+Compare
Sequentially automates from Function 1, Copy to Function 2, Compare.
Scroll to select "3. Copy+Compare", then press "OK" to start the automated duplication and
verification process.
Caution
User is responsible for verification of targets’ quality. Testing a few completed
targets in a mass production environment for quality control is
recommended.
4. Erase
Step 1: Connect device(s) for sanitizing.
Step 2: Enter function "4. Erase"
Scroll to select "4. Erase”, then press "OK" to view these erase modes.
Caution
User is responsible for verification of targets’ quality. Testing a few completed
targets in a mass production environment for quality control is
recommended.
4.1 Quick Erase
This function will erase the index table from the connected device(s).
Scroll to select "Quick Erase”, then press "OK" to start the erasing process.
Note
The number of working/connected targets will be displayed on the LCD. Press
"OK" to start.
Caution
Please back up all important data before using this function.
Note
Source Port is disabled for erasing. Go to this function “Erase Master” to
enable source port erasing.
⚫
Press “
▲
” or “
▼
” to view real-time status of each port.
⚫
Press “OK” to view the details of each port.