14
◼
Model Number
Show HDD’s model number.
◼
Version of Firmware
Show HDD’s firmware version.
◼
Serial Number
Show the serial number of HDD.
◼
Device Power Cycle
Show the count of HDD's turning on and off.
◼
Power-on Hours
Show the total power-on hours of HDD.
◼
Reallocation Event Count
Show the count of reallocating events.
When the HDD fails to save data, it will need to redefine the location to store
data. Therefore, a higher count of reallocation events represents more errors.
◼
Off-Line Scan Uncorrectable Sector Count
Show the sector volume that is uncorrectable when scanned offline. The more
the uncorrectable sector volume is, the more serious the HDD's damage.
◼
Seek Error Rate
Show the error rate of searching for data. It can represent the damage rate of
data stored in the HDD.
◼
Temperature
Show the temperature of HDD.
5.2 Update System
Step 1: Create an Update HDD
Connect a SDD/HDD to the duplicator. Select function "5.2 Create Update
HDD".
Step 2: Format BIOS HDD
Click "OK" to format the BIOS hard disk. One FAT, 2GB partition will be
formatted on the HDD. Creating such a partition reduces searching time, and
speeds up the firmware update.
[Update System]
2. Create Update HDD
